Placing a carpet in the patio or any other concrete outdoor space in your home can add a lot of comfort, not to mention reducing slipping hazards as concrete can get extremely slippery when wet. However, sticking an outdoor carpet to concrete is always a big problem for most people. Thus a common question they often ask is, “How do you stick outdoor carpet to concrete.?
How Do You Stick Outdoor Carpet to Concrete? (How to Do it Right)
One of the best and most effective ways of getting your outdoor carpet to stick to concrete is by using a double-sided carpet tape like the YYXLIFE Double Sided Carpet Tape for Area Rugs Carpet Adhesive Rug Gripper Removable Multi-Purpose Rug Tape.
The YYXLIFE Double-Sided Carpet Tape is a heavy-duty carpet tape that helps keep your carpets, rugs, and runners in place.
Concrete is a slippery surface and it’s thus hard to get carpets or rugs to stay in place. They tend to slip all over the place. You certainly don’t want this.
Using a double-sided carpet tape is a guaranteed way to keep the carpet in place.
Even better, it helps prevent slipping accidents.
One of the biggest advantages of using this carpet tape is that it does not leave any adhesive residue behind. This means that when the time comes to remove or replace the rug, you won’t have to suffer through the tough adhesive removal job.
Another huge advantage is that it’s really durable and will even stand against even the harshest weather conditions. The adhesive will stay strong for a very long time and this means your outdoor carpet will get to stay in place too.
Overall, it’s a safe, durable, and really effective carpet tape that will secure your outdoor carpet to your concrete floor.
Without further ado, here is a step-by-step guide on how to easily stick your outdoor carpet to the concrete floor.
How to Stick Outdoor Carpet to Concrete (Step-by-Step Guide)
- Clean the area you want to install the carpet. Dirt and debris can prevent the adhesive from sticking properly to the surface. You’ll want to clean the area thoroughly before installing the carpet. Start by sweeping or vacuuming and then mopping with water and soapy water
- Next, allow the area to dry up completely. Placing the double sided tape on a wet surface will prevent it from securely holding your carpet or rug in place.
- Next, you need to measure the length and width of the concrete floor. This will help you determine the size of outdoor carpet you’ll need to purchase
- With everything ready, mark several areas on the concrete surface where you’re going to install pieces of the double-sided carpet
- Next, unroll the carpet tape and install the sticky side to the concrete floor surface on which the carpet will be laid. Do not peel off the top side with paper just yet.
- After all the marked areas have been taped, now it’s time to peel off the paper side
- Next, carefully lay down your carpet on top of the now exposed adhesive tape and press firmly.
- Unrolling the carpet will be a much better option in order to prevent bumps or uneven areas.
- Once the carpet is in place, gently flatten it out with your hand
- That’s all!
How to Stick Outdoor Carpet to Concrete with Glue
Using a double-sided carpet tape to stick your carpet to a concrete floor is one of the best, easiest, and most effective ways. It’s cheap and hassle-free too.
However, there is still another way you can do it- though it’s a little bit messier.
I am talking about applying a tenacious adhesive on the concrete floor and then laying the carpet right over it.
To do this, purchase a high-quality adhesive. A good example is the ROBERTS 6700-0 Carpet Adhesive, 1 Quart, Creamy Tan.
If the area you want covered by the carpet or rug is huge, you’ll need more glue. Make sure to build a few tubs.
- Sweep/Vacuum the concrete surface and wash the area with soapy water. Don’t apply the adhesive until the area is completely dry
- Next, spread the adhesive all over the surfaces. Spread enough adhesive to ensure a firm, secure fit of the carpet or rug. You can use the Warner 8″ Plastic Adhesive Spreader, 1/8″ Notched to make the spreading task much easier and hassle-free
- Next, carefully spread out the carpet on the glued down surface. Unrolling the carpet is a much easier option than simply laying it over
- Smooth out the carpet with your hand to remove any bumps or uneven areas. Be sure to work from the center to the edges in order to remove any air bubbles under the carpet
- You might want to wait a little bit before walking on the carpet until the glue has set in properly
How Do You Stick Outdoor Carpet to Concrete?- Bottom Line
As you can see, sticking an outdoor carpet to concrete isn’t that hard after all.
With the right tools, you can get the job done in just a matter of minutes.
Hopefully, you’ve learnt how to properly stick an outdoor carpet to concrete floor.